RODUCT CENTER
CONTACT US
13770259688
Address:No. 16 Zhenxing Road, Dongtai Development Zone
Mobile:+86.013770259688
Website:www.naga805.com
Email:ldyc@sina.com
Your current location:Home > Industry information
- Application and maintenance of pile hammer(7)
- 2018/3/19 Times of reading:[1240]
Troubleshooting of piston ring wear
If the diesel hammer does not take off to the required height, it may be because the air pressure in the combustion chamber is too low, the piston rings of the upper and lower pistons should be checked, and if the piston rings are found to be worn out, they should be replaced in time.